If your air conditioning system makes clicking, squeaking, whistling, or banging sounds, it may have a motor or blower assembly problem. If the noise continues after the AC unit is turned off or on, it could be caused by a defective thermostat or faulty control. If you ignore these sounds, you could set your air conditioning system up for more significant problems in the future. Squealing noises can also be caused by belt issues, a broken compressor, or a loose cover panel.

Another problem is a dirty air filter. If the air filter is clogged, it can make the air conditioner overheat. You might also have an obstruction in the air ducts that is causing the compressor to overheat. A professional air conditioner repair service can check the air filters, replace them, and repair refrigerant leaks.

Dirty air filters can also cause poor air flow, especially in Phoenix. In addition, the outside air conditioning unit may have been coated with dirt or debris. You should also check your air conditioner’s coolant levels and prevent the blower motor for damage. A dirty air filter may also cause a buildup of ice on the evaporator coil, which can lead to freezing air.

A dirty air filter is one of the most common problems with air conditioning units. Not only does it reduce the airflow, but it also may cause parts of the system to freeze and fail. The air conditioning unit needs working fans to push cool air through the evaporator and out the outdoor condenser. The compressor can also fail due to a degraded lubricant or a dirty motor.

Another common AC problem is a tripped circuit breaker. If the circuit breaker trips, it can damage the compressor or the entire unit. To solve this issue, you must call a professional technician to repair it. If you have a circuit breaker, check it is in the “on” position.

Poorly calibrated thermostats can cause erratic AC behavior. The best way to troubleshoot fan motor issues is to check your air conditioner regularly. Taking note of possible problems in advance will prevent them from becoming costly. It would help if you also kept an eye out for intelligent gadgets that alert you when your air conditioning system has a problem.

Fuse failures are another common AC problem. These can lead to an overheating problem. To avoid this, make sure the fuse is not blown or damaged. A fuse will protect the system from overloading and is crucial to keeping it cool. Lightning, bad electrical connections, and old age can also cause fuses to blow. A broken thermostat can be caused by faulty tubes or leaks in the seals. A certified technician can fix these problems.

Call Now Button(605) 405-3571